Schedule 60 Pipe Weight
The weight of Schedule 60 pipe is commonly expressed in kg/m or lb/ft. The nominal Schedule 60 weights listed below are based on the standard dimensional relationship between outside diameter and wall thickness. For detailed information, please refer to the ASME B36.10M standard; in the event of any discrepancy, the standard takes precedence.
Schedule 60 Pipe Weight Chart per Foot
The following table provides nominal weight per metre and per foot for commonly listed Schedule 60 sizes.
| NPS | DN | Weight (kg/m) | Weight (lb/ft) |
| 8 | 200 | 53.08 | 35.67 |
| 10 | 250 | 81.54 | 54.79 |
| 12 | 300 | 108.95 | 73.22 |
| 14 | 350 | 126.72 | 85.13 |
| 16 | 400 | 160.13 | 107.6 |
| 18 | 450 | 205.84 | 138.3 |
| 20 | 500 | 247.84 | 166.56 |
| 22 | 550 | 294.03 | 197.6 |
| 24 | 600 | 355.04 | 238.57 |
Published Schedule 60 reference tables show the same general weight values; small differences in the last decimal place can occur depending on rounding and the nominal density used for the calculation.
Schedule 60 Pipe Weight per Foot in lb/ft
| NPS | Weight (lb/ft) |
| 8 | 35.67 |
| 10 | 54.79 |
| 12 | 73.22 |
| 14 | 85.13 |
| 16 | 107.6 |
| 18 | 138.3 |
| 20 | 166.56 |
| 22 | 197.6 |
| 24 | 238.57 |
Is Schedule 60 pipe weight the same for every steel grade?
The nominal weight is primarily determined by pipe dimensions and the density assumed for the calculation. The actual mass can vary slightly with material composition and manufacturing tolerances.
